Reindeer Mask Tutorial - Bonus Pattern Piece

Reindeer Mask Tutorial

Can you believe we’re halfway through November, moreover, that it’s only 5 weeks until the Silly Season starts?!  I can’t, but that’s mostly because I live in topsy turvy land these days.  I’ve been in Australia for 12 years now but I still can’t get used to Christmas and Spring occurring at the same time.  I really need those environmental clues of the Northern Hemisphere, the autumn leaves falling, the nights drawing in, the chill in the air, to get me into the christmas spirit.  I pine for snow and log fires, sledding and hot chocolate, mittens and hot water bottles.

That’s not to say that I don’t enjoy a hot christmas.  It’s a lovely holiday here, full of light and the joys of early summer.  Little girls in white dresses, cherries and stone fruit, seafood and cocktails, bright sunshine and cool breezes.  We throw open all the doors and lounge around in the garden, enjoying balmy evenings under twinkling fairy lights.

Nonetheless, I do find that it requires more of a conscious effort on my part to make December feel festive, and because I am determined that my children should find it as magical as I remember the holidays from my childhood being I tend to overcompensate by going all out with the decorations, music, christmas craft activities, and, of course, handmade gifts.

One of my favourite Christmassy things to make are these little Reindeer masks. I’m heading to Swagger Child Design Market this Sunday so I have been busy stocking up on them, and today I’m offering you a free pattern piece so that you can make them too.  The cute little fawn in my Woodland Creatures Sewing Pattern can be transformed into a festive Reindeer with the addition of these antlers.  Download the pattern extension piece here and scroll down for the tutorial.  If you don’t have a copy of the Woodland Creatures PDF and would like one then you can purchase it here.

Tutorial:

1. Download the bonus pattern pieces and print out.  Make sure that you set your print settings to 100% or select ‘no scaling’.  Measure the 1” square on the page to check that it has printed correctly.

2. Cut out the pattern pieces and pin them to a double layer of felt.  Cut around each piece and then sew the two layers together, sewing 5mm (¼”) from the edge.

Reindeer Mask

TIP:  For a neater finish and an easier time sewing, draw around your pattern pieces while they are pinned to the felt.  You will need a white marker or chalk pen to do this on the dark brown felt.  DO NOT cut the felt out.

Instead sew 5mm (1/4”) inside your drawn line and then cut along the white line once you have sewn the two layers together.

Doing it this way stops the felt from shifting as you sew which can be a particular problem when sewing around curves.

Reindeer Mask Tutorial

3. Sew your fawn mask following instructions on the PDF pattern.  When you come to sew the 2 layers of the face together, sandwich each antler between the 2 face layers, positioning each approximately 1cm (½”) from the ear, and letting the base of the antler extend at least 1.5cm / ¾” into the mask.  Pin in place before sewing around the face.

Reindeer Mask

As you can see I use the same technique for sewing all of my masks i.e. I sew before cutting wherever possible - It's quicker and gives a much nicer finish!

Well, that's it.  You're done!

Happy Holidays.

Reindeer Mask

A Free Batman Mask Pattern for you!

Free Batman Felt Mask Pattern | Willow & Stitch

Bam! Pow! Kaboom!  There have been a lot of superheroes racing around my house recently, rescuing dolls and dinosaurs in distress and generally causing well intentioned chaos.

I've been sewing an AWFUL lot of masks in the last month or so, stocking up my Etsy shop and preparing for the Christmas markets, and silly season in general.  I'm working on getting my second set of superhero mask patterns up in the Etsy shop soon, but in the meantime I thought you might like a little freebie!

Click here to download your FREE Batman felt mask sewing pattern.

The pattern can also be printed onto cardstock, painted, coloured or decorated and cut out - perfect for entertaining the kids on a rainy day or for children's parties.  Be sure to print the pattern at actual size - do not select scaling in your print options.

It's super easy this one; I don't have any photo illustrations for you but you won't need them! This mask should fit most children from around age 2.

You will need:

21 x 30cm (9 x 12") of high quality black felt

Approximately 31cm (12") of 8mm (3/8") wide woven elastic

Black thread

1.  Print the pattern piece and cut 2 mask shapes from your black felt.  TIP:  Draw around the insides of the eyes (with a white pencil or chalk) but do not cut them out yet. 

2.  Lay the 2 pieces one on top of the other, right sides together.  Pin in place.  Use a pin to mark the placement of the elastic on each side of the mask.  

3. Sandwich the elastic between the two layers of felt, pinning it in place so that it extends approximately 1.5cm (1/2") into the mask at each side.

4. Sew right around the outside of the mask, sewing through both layers of felt, and sewing 5mm (1/4") from the edge.  When you reach the spots where the elastic enters the mask sew backwards and forwards a few times to really secure it.

5.  Sew around the eye hole markings, sewing at least 5mm (1/4") from the white lines that you have drawn and keeping the lines INSIDE the circle that you are sewing. Take care not to catch the elastic in your stitches.

6. Cut along the white lines to reveal the eye holes. Again; take care with the elastic, this time making sure you don't cut through it! Cutting the eye holes out after you have sewn around them will give you a much neater finish.

Hope you and your little superheroes enjoy this tutorial.  I always love to see your creations if you feel like sharing them!

You May Also Like...

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch
A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch

I've had this beautiful Cotton and Steel Double Gauze sitting in my cupboard for a while now. Occasionally I pull it out to look at it or give it a stroke (It's SO soft!) but I've been too scared to cut into it until now.

This little girl has recently developed a huge enthusiasm for long dresses.  She only has one (which she wants to wear ALL the time) and she's just about old enough now not to be constantly treading on it so I thought Kids Clothes Week was a good opportunity to make a couple more.  I cut the skirt on this extra long because I wanted to use up every last inch of fabric, and because, well, she's only going to keep on growing!

Ella calls this her 'Ball Gown' and I think it might be her favourite thing EVER!  Sorry for the blurry pictures but she just wouldn't stop dancing...!

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch
A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch

And since the theme for Kid's Clothes Week is 'Disguise' and since this is her 'Ball Gown' we thought we ought to turn it into a Masquerade Ball.  Click here if you'd like to download a free printable template for this mask.

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch
A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch

I actually think she looks like a mini Elizabeth Bennet in this dress and with her brown curls, so I made her pose with books and tea!  Hah!  I think I pretty much just enjoy the experience of telling her what to do and having her do it! (a rare occurrence these days!) Although I suppose I shouldn't get too smug since she's only doing as she's told because I'm bribing her with Jelly Beans....

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch
A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch
A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch

She looks like butter wouldn't melt in her mouth, doesn't she?!  I'm so happy with this dress, it might be one of my favourite makes so far, although I'm a little bit jealous that I didn't get something for me from this fabric!  I think I might have to buy more, It's just so soft and cozy - you've got to love a pretty dress that you can also just snuggle up in haven't you?!  This little girl certainly does...

A Jane Austen Geranium Dress in Cotton and Steel Double Gauze | Willow & Stitch

You May Also Like...

An Awesome Kids Clothes Week / Halloween Giveaway!

In celebration of Kids Clothes Week (where the theme this season is 'Disguise') and with the imminent arrival of Halloween, I thought it was a good time to hold a giveaway.  I'm offering a full set of my PDF Felt Mask Sewing Patterns to one lucky reader!  The winner will get the Woodland Creatures (Owl, Bunny, Fox and Fawn), Fairytale (Unicorn, Princess and Knight) and Superheroes (Iron Man, Captain America and Hulk) Pattern sets.  

Felt Mask PDF Sewing Patterns | Willow & Stitch

These sewing patterns are super quick and easy to sew and all come with bonus free printable masks - great for a rainy day colouring / decorating activity.  To enter simply comment on this post, follow me on instagram or like the Willow & Stitch Facebook page!  Or do all 3 and get bonus entries! The winner will be drawn at random on Monday 26th October.  If you miss out or if you simply can't wait to get your hands on them then you can find them in my Etsy shop here.

In the meantime I'm going to go and get cracking with my Kids Clothes Week sewing!  I'm very excited to be a KCW Contributor this season.  If you missed my guest blog posts you can find my post on 'Disguised Details' here, and two silly posts on making the most of KCW and finding the time to sew here and here!

Are you taking part in Kids Clothes Week? What will you be sewing first?

You May Also Like...

Say 'Hello' to Bonnie! (And to a free doll nappy / diaper pattern) 

Little Amigo Doll in a mini Geranium Dress | Willow & Stitch

This is Bonnie.  She's a 'Little Amigo' doll from Meg McElwee's 'Growing up Sew Liberated' book.  It's one of my favourite sewing books - so many lovely play things to make for your kids.  I think I might have made them all.... This is the third Little Amigo doll that I've made.  'Max' and 'Molly' are two of my kid's most loved toys.  Our sweet little friend, Brea, always makes a bee line for them whenever she's here too, so it was a bit of a 'no-brainer' when it came to her 3rd birthday present - she simply had to have one too. 

For some reason I always feel compelled to make dolls in the image of the child that they're for - they're always thrilled when they notice that the doll has hair 'just like me!' and eyes 'just like mine!'  

I dressed Bonnie in a miniature Geranium Dress from Made-by-Rae and made her a necklace of tiny colourful pompoms.  She came with a little note which read:

Hello Brea,

My name is Bonnie.  I like cuddles and tea parties.  Will you look after me please?

Xx

P.S. Happy Birthday!

Little Amigo Doll in a mini Geranium Dress | Willow & Stitch

And of course no doll is complete without a set of nappies.  I made 3 so that she can have plenty of changes / coordinate her nappy with her outfit.  They are very quick and easy to make and a fantastic way to use up scraps.  Click on the image below to download your pattern pieces.

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

This nappy will fit a doll with a waist of up to 35 cm (14") down to about 21 cm (8").  For reference this doll is 45 cm (18")

You will need:

33 cm x 30 cm (13" x 12")  Cotton

33 cm x 30 cm (13" x 12")  Towelling / Fleece / Microfibre lining

2 x 2.5 cm (1") pieces of Velcro (optionally more for smaller sizes - see note on sizing at the end)

 

Instructions:

Cut 1 piece each from the cotton and from the lining.  Lay them one on top of the other with right sides together.

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

Stitch right around the edge of the nappy with a 1 cm (1/2") seam allowance.  Leave edges open between the notches on the long side of the nappy.

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

Clip corners and curved edges, taking care not to cut through your line of stitching.

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

Turn nappy to the right side using a knitting needle / chopstick to push out the corners.  Press, folding under the seam allowance at the turning hole.  Pin closed.

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch
Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

Edge stitch right around the nappy, sealing the turning hole as you go.  

Free Doll Nappy / Diaper Pattern and Tutorial | Willow & Stitch

Affix velcro to the nappy, placing the loops on the lining of the back (long) edge and positioning the velcro a few mm in from your edge stitching line.  Place hooks on the right (cotton) side of the nappy front (short edge) - again positioning them a few mm in from the edge stitching.  Sew all 4 pieces of velcro in place, sewing right around the edge twice for strength.

If you wish to make this nappy for a smaller doll than this one you will need to adjust the velcro accordingly.  The velcro loops on the back (lining) of the nappy can stay as above and then you can either sew a 16 cm (7") length of velcro right across the top of the front of the nappy, or you can cut a shorter length and simply sew a single piece in the middle of the top front of the nappy. 

Free Doll Nappy pattern and tutorial | Willow & Stitch

My kids will spend hours playing with their 'babies' and changing their nappies.  I'm always especially pleased when my little boy plays with 'Max' - his little amigo doll! I'm not sure why I love it so much, I think it's for the same reason that I love seeing my little girl playing with cars or playing superheros - It's always so nice to see them just enjoying what they're doing without any reference to gender stereotypes and with no preconceptions of that's a 'girl's toy' or a 'boy's game' and that's precisely how it should be - don't you think?  

You May Also Like...

Free Dribble Bib Pattern and Tutorial

This is another project from the Mama and Baby sewing book which I wrote for my sister last year.  I'm still working on getting it ready to publish online but thought I'd share some of the projects beforehand.  Check out my Tutorials page for more free patterns and tutorials.

This little cowboy style neckerchief is fantastic for keeping your baby’s clothes dry, particularly as wet t-shirts can cause chaffing and soreness on their little chins and chests. The soft jersey fabric is very absorbent and the folds catch all the dribbles.  When it gets too wet or dirty you can just pop on a new one without needing a whole outfit change.  These are quick and simple to make and are the perfect project for using up scraps. Click on the image above to download the pattern.

Many people are afraid of using stretch / knit fabrics – and I have to admit that I was one of them before I started playing around with them and discovered that they’re actually great to work with and really very easy once you understand a few basics.  If you're new to sewing with knits then I suggest you check out my 'Beginner's Guide to Knits'.

In any case, don’t panic, all you need to remember is not to stretch the fabric when cutting it (a rotary cutter and mat is perfect for this) and to use a ball point (stretch) needle for your sewing machine. A ball point needle (as the name suggests) is a needle with a slightly rounded tip, meaning that it can pass between woven fibres without cutting them and potentially causing runs in knit fabrics.

 

You will need:

25cm x 50cm of Jersey knit (you can up-cycle an old t-shirt if you like)

25cm x 40cm of fleece / bamboo / towelling or similar for backing.

2 press studs

Dribble bib pattern pieces - click on the image at the top of the page to download them. Pattern pieces include a 1cm (1/2") seam allowance.

 

Directions:

1. Cut 1 of the bib front from your knit fabric, and 1 of the bib back from your fleece or bamboo backing fabric. Be sure to transfer all pattern markings. Markings for press stud positions should be copied onto the RIGHT side of the bib backing.

Press and sew the pleats:

2. With the bib front right side up, fold bib right sides together so that one of the outer pleat markings is matched to the middle mark.  Pin through both layers of fabric where the mark is, then fold bib back to the right side to form a pleat. Press the pleat away from the centre of the bib and pin in place. Repeat for the other side of the bib. Baste along the top edge of the bib front to hold pleats in place.

Willow & Stitch | Free Dribble Bib Tutorial

Join the bib front and back:

3. With bib front and back right sides together, match central notches along the top edge of the bib. Pin in place. Next, match and pin the notches at the pointed tip of the bib (the bottom).  Now align the corners of the bib front and back and pin these in place.  Ease the knit fabric into place so that it matches the edge of the bib back, taking care not to stretch either piece as you do so and allowing the excess knit fabric to form gentle folds in the middle of the bib.  Continue pinning the top and side edges.

4. Using a ball point needle on your sewing machine, join the two pieces with a 1cm (1/2") seam allowance. Sew right around the big, leaving a 5cm (2") turning hole on one of the side edges and backstitching at either side of your turning hole to secure the stitches.

Clip seams and Topstitch bib:

5. Trim seams at corners and tip of bib to 5mm.  Clip seams every 2 cm along sides and top of bib, taking care not to cut through your line of stitching.  Do not clip seam allowance at your turning hole.

6. Turn the bib to the right side, using your fingers or a knitting needle / chopstick to push out the corners. Use your fingers to pinch seams along the edges and pin them in place. Allow your knit fabric to extend a few mm (1/8") past the bib backing so that if you look at the bib from the back you can see a very narrow band of the bib front right around the edge. This will give the bib a better shape by ensuring that the backing fabric is not stretched too tight which would cause the bib tip to curl upwards.

7. Topstitch 5mm (1/4") from the edge, right around the bib, closing the turning hole at the same time. Remove pins as you sew, taking them out just before you reach them to allow fabric to relax into shape.

Attach press studs:

8. Attach your poppers according to the manufacturers instructions. The pattern includes positions for 2 press studs so that you can adjust the size of the bib as your baby grows.

Free Dribble Bib Pattern | Willow and Stitch

Look at that dribble bib in action, soaking up all that goo - Isn't it a beautiful thing?!  Is there a dribbly baby in your life who needs one (or two or three?) of these?

You May Also Like...

Free Feeding Bib Pattern

I'm still working on getting my e-book ready for download, but I thought that in the meantime I would put up some of the projects in it as free tutorials.  This feeding bib is one of my favourites; It's such a lovely way to use up scraps of your favourite fabrics and is really quick and easy to make, even for a beginner.  The pocket at the bottom is very handy for catching spills and when you're finished you can take it off and use the towelled backing for a quick face wipe!

Feeding Bib with Pocket - A free Tutorial and Pattern from Willow and Stitch

Click the link in the image below to download your free copy.

I hope you enjoy this tutorial, I'd love to hear your feedback and if you've made a bib then why not upload a picture to the Willow and Stitch Flickr pool or use the hash tag #willowandstitch on instagram, it'd be great to see what you've made.  

If you liked this pattern then sign up to my newsletter to get notifications of new pattern releases and special offers.  I'll only email when something new and exciting is available.  I hate having my inbox filled with unnecessary emails!  Having said that, feel free to email me if you have any questions about this or other patterns - I never get sick of emails from readers!

willowandstitchdesign@gmail.com

Superhero Mask PDF patterns now available!

I'm super excited to announce that the PDF patterns for my felt Superhero Masks are now available in my Etsy store.  Superheroes #1 includes patterns for Captain America, Iron Man and The Hulk.  

The PDF file is available for immediate download after checkout and includes a materials and supply list, illustrated step by step instructions in English, full size pattern pieces for each mask and hints and tips for a better finish.

Patterns are suitable for beginners, and are quick, easy and fun to make.

As an added bonus I have included free printable mask templates for each design.  These can be printed onto card, then coloured or painted and cut out to form a mask.  Perfect for rainy days or birthday parties.

For the Card masks you will need:

  • 200gsm Paper / Card (or heavier if your printer will accept it)
  • Paints, markers, crayons or pencils.
  • Elastic string
  • A hole punch or sharp point for making the elastic holes.

Print the cardboard template pages (select pages 10, 12 and 14) onto your card or paper. When printing be sure to print at full size (do not scale).  There is a 1 inch test square on each page which you can measure to check that patterns have printed at the right size.

Colour or paint the masks.

Imagine the masterpieces your own kids could create….

Imagine the masterpieces your own kids could create….

Cut around the edge of the mask and cut out the eye holes.

Punch holes in the positions marked on each side and thread elastic string through.  Adjust to the required length and tie off.

You're done! Superheroes are ready to go!